#LASERDRW 3 HOW TO#
#LASERDRW 3 MANUALS#

The styrofoam will melt away with a small kerf at the top and 1/2 inch kerf on the bottom. When cutting 1.5 inch styrofoam, the laser does not stay focused enough to provide a deep, narrow kerf. The 55mm focal lens is fine when cutting under 3/8 hard materials. This is especially important when trying to cut deeper into materials. Why do you need a 100mm focal lens? The 100mm focal lens acts like a sharper knife. The smaller laser machine can get improved cutting performance by using a 100mm focal lens. It is normal that the higher wattage lasers are used for cutting more than used for engraving. The 55mm lens is the standard for the laser engraving machines of 60 watts and less. Modifications for using a 100mm Focal lens through a 55mm nozzle

#LASERDRW 3 HOW TO#

How to make the software settings for the Chuck-type rotary attachments. Using the Roller-Style Rotary attachment. 6535 The increased air pressure can provide cleaner engravings and better cuts. How to add high flow control valve to the laser machine. 6515 The increased air pressure can provide cleaner engravings and better cuts. The procedure for aligning the flying optics for the laser beam. Please read the CAUTION items before operating the laser machine. Stratup Procedure before operating the laser machine.

Provides information about what firmware is installed to your laser machine and how to update or correct currupted firmware. Installing Firmware to USB Rabbit Laser Machine PDF.ĭownload projects using the USB port. Installing the LaserCut driver for AutoCAD. Installing the LaserCut driver for Corel. (This controller card is for servo motor control.) Manufacturer's complete hardware manual for the MPC-6575 motion controller. Soon to be released 6585 controller card, software manual, and hardware manual. Manufacturer's software manual for the MPC-6575 motion controller. Manufacturer's complete hardware manual for the MPC-6535 motion controller.(This controller card is replaced by the MPC-6565 controller card.) (This controller card is replaced by the MPC-6525 controller card.) Manufacturer's complete hardware manual for the MPC-6515 motion controller. Laser machine (software) Operator's Manual for machines controlled by MPC6515 USB interface and PAD03 Operator console. LaserCut 5.1 Software Manual for laser machines controlled by MPC03 parallel interface.

LaserCut 5.3 Software Manual for laser machines controlled by MPC6515 USB interface. Software (and general reference documents):

#LASERDRW 3 MANUALS#

Manuals and Tutorials for Laser Engraver / Cutter Machines

Laserdrw 3